Jedi Training Remote STL Files

Jedi Training Remote STL Files for 3D Printing on either a Resin or FDM 3D Printer.

The Jedi Training Remote can be printed and displayed as a static prop or installed with LED's to make a Table Lamp.

 All the pictures above are image captures from the 3D design software.

Features:

• Near Screen Size - Measures just under 15mm in Diameter
• Can be converted into a Table Lamp
• Can be painted as Luke's or Rey's Jedi Training Remote

 The 3D printed parts will require sanding and painting to make a quality finished prop.

Preparation of 3D Printed Parts for Assembly:

This is a time consuming process, but more time spent on preparation will result in a better looking prop.

1. All parts will require sanding. (FDM printed parts will require more sanding than Resin printed parts).
2. Assembling the parts. (Some parts can be assembled before painting and fitting the electronics).
3. Fill any seams and joints with a good quality filler.
4. More sanding.
5. Filler Primer.
6. More Sanding.
7. Final Painting
8. Fit electronics (If installing) and final assembly.
9. Weathering (Optional).

This Item is a digital download of the STL files in Zipped format:

You must log into your account to access your downloads.

• 1 x Jedi Training Remote STL Files Zip

Please Note: A 3D Printer is required to print these files.

IMPORTANT:

Before placing your order, please make sure you have read and understood the following policies:

File Licences, Terms & Conditions, Shipping Policy