E-11 Hengstler STL Files

STL Files to 3D print the E-11 Hengstler. 

(These STL Files are included in the E-11 Stormtrooper Blaster Rifle STL Files)

The files included allow the Hengstler to be printed for electronics with an OLED Display or with Numbers for a Static Display Model.

 All the pictures above are image captures from the 3D design software.

Features:

• Only 10 STL Files to Print
• Can be printed for use with Electronics or a Static Display Model
• Can also be Fitted with LED Lights in the Hengstler Front

 The 3D printed parts will require sanding and painting to make a quality finished prop.

Preparation of 3D Printed Parts for Assembly:

This is a time consuming process, but more time spent on preparation will result in a better looking prop.

1. All parts will require sanding. (FDM printed parts will require more sanding than Resin printed parts).
2. Assembling the parts. (Some parts can be assembled before painting and fitting the electronics).
3. Fill any seams and joints with a good quality filler.
4. More sanding.
5. Filler Primer.
6. More Sanding.
7. Final Painting
8. Fit electronics (If installing) and final assembly.
9. Weathering (Optional).

This Item is a digital download of the STL files in Zipped format:

You must log into your account to access your downloads.

• 1 x E-11 Hengstler STL Files Zip

Please Note: A 3D Printer is required to print these files.

IMPORTANT:

Before placing your order, please make sure you have read and understood the following policies:

File Licences, Terms & Conditions, Shipping Policy