E-11 Blaster Stand STL Files

STL Files to 3D print an E-11 Blaster Stand. 

The Download is for the files to print a Stand for the E-11 Blaster.

The Stand is Designed to Hold the DeAgostini Stormtrooper 1:5th Scale Helmet.

I have managed to find an STL File for the Helmet which is included in the Download.

 All the pictures above are image captures from the 3D design software.

Features:

• Only 9 STL Files to Print the E-11 Blaster Stand, Plaque and Plaque Stand.
• You can also 3D Print the Stormtrooper Helmet (Best printed on a Resin Printer)

 The 3D printed parts will require sanding and painting to make a quality finished prop.

Preparation of 3D Printed Parts for Assembly:

This is a time consuming process, but more time spent on preparation will result in a better looking prop.

1. All parts will require sanding. (FDM printed parts will require more sanding than Resin printed parts).
2. Assembling the parts. (Some parts can be assembled before painting and fitting the electronics).
3. Fill any seams and joints with a good quality filler.
4. More sanding.
5. Filler Primer.
6. More Sanding.
7. Final Painting
8. Fit electronics (If installing) and final assembly.
9. Weathering (Optional).

This Item is a digital download of the STL files in Zipped format:

You must log into your account to access your downloads.

• 1 x E-11 Blaster Stand STL Files Zip

Please Note: A 3D Printer is required to print these files.

IMPORTANT:

Before placing your order, please make sure you have read and understood the following policies:

File Licences, Terms & Conditions, Shipping Policy