Class-A Thermal Detonator STL Files

Class-A Thermal Detonator STL Files for 3D Printing on either a Resin or FDM 3D Printer.

The Thermal Detonator can be printed and displayed as a static prop or fitted with my Thermal Detonator V2.10 PCB Board and Electronics Kit from PropTroniX.

The Download includes a full comprehensive set of Build Instructions in PDF Format.

All the pictures above are image captures from the 3D design software.

Features:

• Moving Top Slide (Turns the Thermal Detonator On/Off).
• Designed for installing PropTroniX Thermal Detonator V2.10 Electronics Kit.
• Comes with a Comprehensive Set of Build Instructions

Don't forget to add the following products to your order:

Class-A Thermal Detonator STL Hardware Kit

The Class-A Thermal Detonator STL Hardware kit includes all the screws used in the build.

The 3D printed parts will require sanding and painting to make a quality finished prop.

 

Preparation of 3D Printed Parts for Assembly:

This is a time consuming process, but more time spent on preparation will result in a better looking prop.

1. All parts will require sanding. (FDM printed parts will require more sanding than Resin printed parts).
2. Assembling the parts. (Some parts can be assembled before painting and fitting the electronics).
3. Fill any seams and joints with a good quality filler.
4. More sanding.
5. Filler Primer.
6. More Sanding.
7. Final Painting
8. Fit electronics (If installing) and final assembly.
9. Weathering (Optional).

This item is a digital download of the STL files in Zipped format:

You will need to log into your account to access the download.

1 x Class-A Thermal Detonator STL Files Download. (The download is in ZIP format)

Please Note: A 3D Printer is required to print these files. Resin or FDM.

IMPORTANT:

Before placing your order, please make sure you have read and understood the following policies:

File Licences, Terms & Conditions, Shipping Policy